Putties

Spatula putty

Spatula putty for smoothing and preparing wall surfaces to be covered with paint or other coatings. Suitable for surfaces made of concrete or plaster. Replaces oil stuccos and other similar materials.

Polymer-modified spatula putty

Polymer-modified, cement-based putty. It is extra fine-graded and suitable for smoothing and preparing interior wall surfaces to be covered with paint or other coatings. Suitable for surfaces made of concrete or plaster. Replaces oil stuccos and other similar materials. Due to its low weight it is easy to use and covers up to 18% extra surface compared to the conventional putties. It id classified as type GP CS II, W0 mortar according to EN 998-1.

Polymer-modified cement putty

Polymer-modified cement putty for repairing and puttying exposed concrete, fixing of pores or cavities etc.

Polymer-modified cement putty, extra fine-graded

Polymer-modified cement putty, extra fine-graded, for repairing and puttying exposed concrete. It can be also applied using a gunite machine.

Polymer-modified cement putty, extra fine-graded

Polymer modified cement putty, extra fine-graded, easily applicable, suitable for repairing and puttying exposed concrete, fixing of pores or cavities etc. Lightweight, it can be applied or sanded easily and has little consumption. It can be applied using a gunite machine. Classified as type PCC R1 mortar for concrete repairs, according to EN 1504-3.

2-component flexible putty

2-component, flexible putty, which is consisted of a cement-based powder (component A) and a resin emulsion (component B). It provides high elasticity, water impermeability and durability. It has very good adhesion and can be applied to a thickness of up to 5 mm. Suitable for sealing and waterproofing joints and cracks, on walls or floors. It can be also used on window recesses, junctions between floors and walls, as well as for puttying surfaces with hair-cracks. It can be applied on plaster, cement, gypsum boards, wood etc. Ideal for outdoor applications.

Pasty acrylic putty

Ready to use acrylic putty. Suitable for indoor and outdoor use. It is very convenient in application and rubbing. It provides a flat and smooth final surface, ready for priming and painting. Ideal for stuccoing surfaces of plaster, concrete, masonry, wood, gypsum board and cement board.

Ready-to-use, lightweight acrylic spackling putty

Ready to use, lightweight acrylic spackling putty for filling and patching cracks and holes of any kind, in a single step. It is applied on plaster, gypsum board, wood etc. at a maximum thickness of 5 cm. It does not crack and it doesn't need to be rubbed. Painting follows after 30 minutes. For indoor and outdoor application.

Pasty acrylic gypsum board putty - Joint compound

Ready-to-use acrylic spatula putty. Suitable for stuccoing (skim coat puttying) and pointing gypsum boards. Provides a flat and smooth final surface, ready for priming and painting.

Joint compound for cement boards

Polymer-modified, fibre-reinforced, cement-based joint compound for cement boards. It features great flexibility, high mechanical strength and superb adhesion to the substrate. It can be applied and rubbed easily. It provides a smooth final surface ready for any additional covering (paint, tiles etc.).

High-strength cement for preparing durable cement mortars

High-strength cement for preparing durable cement mortars.