Mortar Additives

Mortar plasticizer - Lime replacement

Mortar plasticizer and setting retarder. Replaces lime. Certified with the CE marking as air entraining/plasticizing admixture for masonry mortar according to EN 934-3:T2, certificate number: 0906-CPD-02412007.

Transparent mortar plasticizer - Lime replacement

Colorless mortar plasticizer and setting retarder. Replaces lime. Certified with the CE marking as air entraining/plasticizing admixture for masonry mortar according to EN 934-3:T2, certificate number: 0906-CPD-02412007.

Mortar plasticizer in powder form - Lime replacement

Mortar plasticizer in powder form. Replaces lime.

Waterproofing admixture for mortars and non reinforced concrete

Waterproofing admixture for mortars and non reinforced concrete with plasticizing properties. It is used for water-impermeable cement mortars, non-reinforced concrete, plasters etc.

Elastifying agent

Polymer dispersion - Elastifying agent for waterproofing slurries (when added to AQUAMAT or cement mortars) or cementitious tile adhesives (when added to Isomat® AK 20, Isomat® AK 10 etc.). Replaces all or part of the mixing water. Necessary for applications on dimensionally unstable substrates, subject to vibration or contraction-expansion.

Polymer latex for multiple improvement of mortars

Polymer latex (SBR). Improves the properties of mortars in several ways offering, e.g. increased bonding to substrate and flexibility, shrinkage reduction, higher resistance to chemical effects and abrasion, enhanced water impermeability etc. Ideal for creating the bonding layer between old and new concrete or mortar. 

Latex admixture - Bonding agent

Polymer latex. When added into the building mortars and coatings, it increases bonding to the substrate, provides water impermeability and elasticity. It is suitable for creating bonding layers, repairing mortars, floor screeds resistant to abrasion, waterproof cement mortars, mortars resistant to chemicals, plasters with high strength and water impermeability etc. 

Additive for tile adhesives and joint grouts

Paraffin - based, water emulsion for protecting fresh concrete from quick evaporation of mixing water. It ensures the full hydration of cement, thus it reduces any drying shrinkage cracks. It is usually applied on large surfaces of exposed concrete such as industrial floorings, parking areas, concrete slabs etc. In case of subsequent layers on the concrete surface, ISOCURE must be removed by water blasting.