Epoxy-Based Materials

2-component epoxy putty, extra fine-graded

2-component, epoxy putty, extra fine-graded. Ideal for puttying any type of surfaces. It is also used for bonding concrete, steel, stone, wood etc. as well as for restoring damages on concrete and cement mortars. For limited applications, mixing of less quantity of the components A and B is possible, by keeping ratio 1:1 by volume.

2-component epoxy putty

2-component epoxy putty. Used for bonding concrete and steel, repairing concrete, filling joints and sealing cracks that will be injected with EPOMAX-L10, EPOMAX-L20, DUREBOND.

Three-component, high-strength, pourable epoxy grout

Three-component, pourable, high-strength, non-shrinking cast grout. Based on a 2-component solvent-free epoxy resin and on special selected quartz sand. It provides high initial and final strength, excellent bonding with steel and concrete and high resistance to impacts and vibrations. It is used for anchor bolts, machine bedding, bridge bearings, stanchions etc., It can be also used as a pourable mortar for repairs in damaged concrete elements.

2-component, injectable epoxy resin for cracks 0,1-1,0 mm wide

2-component, injectable, solvent-free epoxy resin. It is used for resin injections in concrete elements with cracks 0,1-1 mm wide, ideal fixing and anchoring of reinforcement rods in concrete elements etc. It can be perfectly applied even on damp substrates.

2-component, injectable epoxy resin for cracks 0,5-3,0 mm wide

2-component, injectable, solvent-free epoxy resin. It is used for resin injections in concrete elements with cracks 0,5-3,0 mm wide, fixing and anchoring of reinforcement rods in concrete elements etc. It can be perfectly applied even on damp substrates.

2-component, injectable epoxy resin for cracks > 3 mm wide - Bonding agent

2-component, solvent-free epoxy resin, for bonding fresh concrete to hardened concrete. Also used as injectable resin mortar for resin injections in concrete elements with cracks 3,0 mm wide or more, fixing and anchoring of reinforcement rods in concrete elements etc. It can be perfectly applied even on damp substrates.

For the injection of epoxy resins into structural elements

For the injection of EPOMAX-L10, EPOMAX-L20 and DUREBOND epoxy resins into structural elements.

Fast curing anchoring adhesive for reinforcement rods

Two component polyester based anchoring adhesive. It does not contain solvents and styrene. Suitable as an anchoring adhesive for reinforced bars, reinforced rods, threaded rods etc.