Cement-Based Plasters

Mortar for bonding spatterdash of plaster

Pre-mixed, cement-based plaster, used to create the bonding spatterdash of the subsequent plaster layer. Suitable for creating the bonding spatterdash (rough cast) on concrete, masonry, thermo-insulation boards etc. in order to enhance the adhesion of the "base layer" of plaster that follows. Needs only the addition of water. Ideal for application with plastering machine. It classified as type GP CS IV, W1 mortar according to EN 998-1.

Base layer plaster

Pre-mixed, cement-based plaster, used to create the "base layer" (brown coat) of plaster. It constitutes the ideal substrate of the colored, water-repellent finish coat plasters application with plastering machine. Needs only the addition of water. It is classified as type GP CS II, W0 mortar according to EN 998-1.

One layer plaster

Pre-mixed, one layer plaster. Applied on maximum thickness of 3cm per layer. Its usage requires the application of a bonding spatterdash (rough cast). Is mixed only with water. The plaster is applied with a plastering machine or by hand, using a float or a trowel. It is classified as type CS IΙ, W0 mortar according to ΕΝ 998-1.

Cement-based plaster - Smooth finish • White • Water-repellent

Decorative, water-repellent finish coat plaster, white for the preparation of smooth surfaces. Needs only water. It is classified as type GP CS IΙ, W1 mortar according to ΕΝ 998-1.

Cement-based plaster - Coarse-textured finish • White • Water-repellent

Decorative, water-repellent finish coat plaster, for the preparation of rough-textured surfaces. Needs only water. It is classified as type GP CS IΙ, W1 mortar according to ΕΝ 998-1.

Polymer-modified, cement-based plaster - Smooth finish • White or colored • Water-repellent

Decorative, polymer-modified, water-repellent finish-coat plaster, white or colored for smooth final surface. It is applied on substrates with special demands in elasticity and adhesion. Needs only water. Rules out the need for painting. In combination with the fibre-reinforced adhesive Isomat® AK-THERMO it is used as a system for application on facade thermo-insulation boards. It is classified as type GP CS IΙ, W2 mortar according to ΕΝ 998-1.

Polymer-modified, cement-based plaster - Coarse-textured finish • White or colored • Water-repellent

Decorative, polymer-modified, water-repellent finish-coat plaster, white or colored for rough-textured final surface. It is applied on substrates with special demands in elasticity and adhesion. Needs only water. Rules out the need for painting. In combination with the fibre-reinforced adhesive Isomat® AK-THERMO it is used as a system for application on facade thermo-insulation boards. It is classified as type GP CS IΙ, W2 mortar according to ΕΝ 998-1.

Polymer-modified, water-repellent plaster, for rough-textured final surface

Polymer-modified, water-repellent, cement-based finish coat plaster. It consists of aggregate with a special particle size granulation, to form an extra coarse-textured decorative surface. It is applied on substrates with special demands in elasticity and adhesion. In combination with the fibre-reinforced adhesive Isomat AK-THERMO it is used as a system for application on thermo-insulation boards. It is classified as type GP CS IIΙ, W1 mortar according to ΕΝ 998-1.

Mortar-binder for the preparation of white water-repellent plasters

Mortar-binder for preparation of white, water-repellent plasters. To be mixed with marble sand and water.

Restoration plaster for renovation

Restoration plaster, particularly durable to salts and moisture. Suitable for the restoration of renders in buildings located near to the sea or in areas exposed to rising damp. Appropriate also for areas with high humidity such as bathrooms, basements etc. For indoor and outdoor applications.

Impregnation of salt damaged masonry

Special impregnation for the restoration of salt damaged masonry. It transforms water soluble salts such as chlorides and sulphates into insoluble compounds. It is used for the restoration of salt damaged masonry in combination with the renovation plaster MARMOCRET-SP.

Mortar for plastering and masonry

Mortar suitable for plastering and masonry works. It is classified as GP CS II W0 mortar according to EN 998-1.

Fast-setting, white repairing mortar

Fast-setting, white mortar, idael for quick plaster repairs in old and new constructions. Replaces the use of gypsum in respective applications. It is classified as GP CS I W0 mortar according to EN 998-1.

Pre-mixed, cement-based mortar for masonry

Pre-mixed, cement-based mortar for masonry. It is used only with the addition of water. It simplifies and accelerates the applications. Used on various types of building materials such as bricks, blocks, aerated concrete blocks, stone, etc.

Pre-mixed, cement-based mortar for exposed masonry

Pre-mixed, cement-based mortar for masonry. Due to its special formula it prevents the formation of salts on masonries which are exposed to the weather conditions. It is used on various types of building materials such as bricks, blocks, stone, etc.