Tile Adhesives

Cement-based tile adhesive

Cement-based tile adhesive. Suitable for fixing ceramic tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. For indoor and outdoor applications. It is classified as type C1 adhesive according to EN 12004.

Cement-based tile adhesive, with no vertical slip

High quality cement-based tile adhesive. Suitable for fixing ceramic tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. It is qualified as non-slip (zero slipping of the tile). For indoor and outdoor applications. It is classified as type C1 T adhesive according to EN 12004.

High performance, polymer-modified tile adhesive

Polymer-modified, cement-based tile adhesive. Suitable for fixing granite tiles and generally absorptive or non-absorptive wall or floor tiles on various substrates such as concrete, brickwork, plaster etc. For indoor and outdoor applications. It is classified as type C2 E adhesive according to EN 12004.

High performance, polymer-modified tile adhesive

High quality, polymer-modified, cement-based tile adhesive. Suitable for fixing granite tiles and generally absorptive or non-absorptive wall or floor tiles on various substrates and especially where high adhesion and resistance to moisture are required. It is qualified as absolutely non-slip (zero slipping of the tile). For indoor and outdoor applications.  It is classified as type C2 TE adhesive according to EN 12004.

High performance, flexible, polymer-modified tile adhesive

High quality, polymer-modified, cement-based, non-slip tile adhesive. Suitable for fixing absorptive or non-absorptive tiles (e.g. "gres porcelanato"), large tiles etc. on walls or floors on substrates with high demands for adhesion, elasticity and moisture resistance (e.g. old tile layers, floors with in-floor heating etc.). Possesses increased open time. For indoor and outdoor applications.  It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002.

High performance, polymer-modified adhesive for critical substrates – Low Dust Technology

High performance, polymer-modified, cement-based tile adhesive. It is characterized by extended open time and no vertical slip. Due to its special composition it minimizes the dust that is produced during the mixing with water. Suitable for fixing ceramic and porcelain tiles, natural stone, decorative bricks etc. on walls or floors on substrates where high adhesion, elasticity and moisture resistance is required. For indoor or outdoor applications. It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002.

High performance, flexible, polymer-modified tile adhesive

Flexible, high quality, polymer-modified, cement-based, non-slip tile adhesive. It is suitable for fixing absorptive or non-absorptive tiles (e.g. "gres porcelanato"), large tiles, glass mosaic tiles etc. on walls or floors on substrates with particularly high demands for adhesion, elasticity and moisture resistance (e.g. floors with in-floor heating, metallic surfaces, swimming pools, gypsum board etc.). Possesses increased open time. For indoor and outdoor applications.  It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002.

High performance, elastic, polymer-modified tile adhesive

High-performance, elastic tile adhesive with extended open time. Fields of application: Appropriate for fixing all kinds of tiles on walls and floors. For applications where elasticity, adhesion, and moisture resistance is required (e.g. old tile layers, heated floors, metallic surfaces, swimming pools, gypsum-boards). For indoor and outdoor applications. It is classified as type C2 TΕ S2 adhesive according to EN 12004 and EN 12002.

Light-weight, elastic tile adhesive

Light-weight, elastic, polymer-modified, cement based tile adhesive. It has increased open time and it is qualified as non-slip (zero slipping of the tile). Suitable for fixing all types of tiles, natural stone etc., on wall or floor, on several substrates (old tile layers, gypsum-boards etc.). It is classified as type C2 TE S2 adhesive according to EN 12004 and EN 12002.

Light-weight, flexible tile adhesive

Flexible, easy to use polymer-modified, cement-based, non-slip tile adhesive. It is suitable for fixing absorptive or non-absorptive tiles (e.g. "gres porcelanato"), glass mosaic tiles etc. on walls or floors on substrates with particularly high demands for adhesion, elasticity and moisture resistance (e.g. floors with in-floor heating, metallic surfaces, swimming pools, etc.). Possesses increased open time. For indoor and outdoor applications. It is classified as type C2 TE S1 adhesive according to EN 12004 and EN 12002.

High performance, two-component elastic tile adhesive

2-component elastic tile adhesive. It consists of a cement-based powder mortar (component A) and a resin emulsion (component B). Suitable for fixing tiles of every type on walls or floors, on vibrative or dimensionally unstable substrates like gypsum board, chipboard, floors with in-floor heating, terraces, balconies, swimming pools, etc. It possesses increased open time for application. For indoor and outdoor applications. Combined with the elastic sealing slurry AQUAMAT-ELASTIC, it provides a perfect system for sealing and fixing. It is classified as type C2 E S2 adhesive according to EN 12004 and EN 12002.

Fast-setting polymer modified tile adhesive

Fast-setting, polymer modified cement-based tile adhesive. Suitable for fixing absorptive or non-absorptive tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc. Ideal in cases where the surfaces have to be delivered fast for use, e.g. work areas etc. It is qualified as absolutely non-slip (zero slipping of the tile). For indoor and outdoor applications.  It is classified as type C2 FT adhesive according to EN 12004.

Two-component, fast-setting, elastic tile adhesive

Fast setting, flexible, two component tile adhesive with extended open time. Fields of application: Suitable for fixing all kinds of tiles, on walls and floors, on various substrates such as gypsum-boards, chip-boards, heated floors, terraces, balconies, swimming pools etc. It is ideal for floors with heavy traffic and for areas that must be ready for use within short time. It is suitable for indoor or outdoor applications. It is classified as type C2 FΕ S1 adhesive according to EN 12004 and EN 12002.

Fast-setting, flexible, polymer-modified tile adhesive

High performance, fast-setting, flexible, polymer-modified tile adhesive. It is qualified as non-slip (zero slipping of the tile). Suitable for fixing absorptive or non-absorptive tiles on walls or floors on surfaces made of concrete, brickwork, plaster etc., especially when high adhesion, elasticity and resistance to moisture is required. Ideal in cases where the surfaces have to be delivered fast for use, e.g. work areas etc. For indoor and outdoor applications. It is classified as type C2 FT S1 adhesive according to EN 12004 and EN 12002.

Coarse-grained tile and natural stone adhesive

Cement-based tile adhesive for thick layers (up to 15 mm). Suitable for fixing tiles or natural stone on walls or floors on surfaces made of concrete, brickwork, plaster etc. Possesses increased open time for application. For indoor and outdoor applications.  It is classified as type C1 E adhesive according to EN 12004.

Polymer-modified adhesive for decorative overlayers

Coarse-grained, polymer modified, cement-based tile adhesive for thick layers (up to 15 mm). Suitable for fixing and pointing decorative overlays (artificial stone, slate, decorative bricks etc.) on walls or floors on various surfaces and especially where high adhesion and moisture resistance are required. Possesses increased open time for application. For indoor and outdoor applications.  It is classified as type C2 E adhesive according to EN 12004.

Polymer modified marble and granite adhesive

Fast-setting, polymer modified cement-based marble and granite adhesive. Suitable for fixing marble or granite on walls or floors on various surfaces and especially where high adhesion and moisture resistance are required. Prevents staining of sensitive overlays, such as marble layers, due to fast retention of water. Possesses increased open time for application. For indoor and outdoor applications.  It is classified as type C2 E adhesive according to EN 12004.

High quality, polymer-modified, full-bed leveling tile adhesive

Polymer-modified, cement- based tile adhesive with increased open time. After mixing  with water, it attains fluid consistency. Suitable for thick layers (up to 20mm). Fields of application: Fixing absorptive and non-absorptive floor tiles on various surfaces. Ideal for fixing large tiles by the full-bed laying method and wherever the leveling and fixing of tiles on irregular substrate is required. For indoor and outdoor applications. It is classified as type C2E according to ΕΝ 12004.

Adhesion promoter for tile adhesives

Highly penetrative, polymer emulsion used as adhesion promoter on smooth, absorbent or non-absorbent substrates, before the application of cement based tile adhesives.

High performance, ready-to-use, pasty tile adhesive

Ready-to-use, pasty tile adhesive based on acrylic resins. Ideal for minor repairs due to its fast and easy application. Fields of application: Suitable for fixing tiles on surfaces such as concrete, plaster, gypsum-plaster, wood etc. Also appropriate for areas with high humidity such as bathrooms, kitchens, etc. It is used indoor on walls and floors and outdoor on walls. It is classified as type D2T adhesive according to EN 12004.

2-component epoxy tile adhesive

2-component solvent-free epoxy adhesive. It is suitable for fixing every type of tiles to several substrates, on walls or floorings. It has high adhesion strength and high chemical resistance. It can also be used for pointing tile joints.