Epoxy-Based & Polyurethane-Based Floorings

2-component, self-leveling epoxy flooring

2-component, solvent-free, self-leveling epoxy flooring. After mixing the two components, Q35 quartz sand is added inside in proportions DUROFLOOR : quartz sand = 1:2 by weight.

2-component epoxy flooring

2-component, solvent-free epoxy flooring. With the addition of quartz sand Μ32 in proportions 1:1 by weight, it can be used as a self-leveling epoxy flooring. Also, without adding quartz sand, it can be applied as a brushable epoxy coating.

2-component, brushable epoxy coating

2-component, solvent-free brushable epoxy coating, suitable for concrete or cement mortar surfaces.

Two-component, brushable epoxy coating

Two-component, solvent-free, colored epoxy system, with very low content of volatile organic compound (VOC) according to LEED. It is used as a brushable coating on concrete floors, cement screeds etc., when high mechanical or chemical strength is required.

Two-component, brushable polyurethane coating

Two-component, colored, polyurethane coating without solvents, with excellent resistance to UV radiation. DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc.

2-component, colorless epoxy impregnation

2-component, colorless, solvent-based epoxy resin. Used as an impregnation on cement-based substrates to provide higher stability and abrasion resistance. Prevents dust creation on the floor surface. Also, used as a primer for EPOXYCOAT, EPOXYCOAT-S and EPOXYCOAT-VSF.

2-component, self-leveling, conductible epoxy flooring

2-component, solvent-free, self-leveling, conductible epoxy flooring, used to eliminate static electricity problems.

2-component, conductible epoxy varnish

2-component, conductible epoxy varnish. To be used before DUROFLOOR-C.

2-component, solvent-free epoxy primer

Transparent, two-component, solvent-free epoxy primer. It is used as a primer on surfaces that will be subsequently coated with epoxy flooring systems, as a binder for preparing epoxy mortars with the addition of quartz sand and also for sealing cementitious floors at industrial areas and warehouses.

Two-component, solvent-free epoxy primer

Two-component, solvent-free epoxy primer. It is used as a primer on surfaces which will be subsequently coated with epoxy flooring systems and also as a binder for preparing epoxy mortars with addition of quartz sand.

Two-component, solvent-free epoxy primer

Two-component, solvent-free epoxy primer. It is used as a primer on cementicious substrates to be coated with epoxy layers of the DUROFLOOR system. With the addition of quarz sand it can be used as resin-mortar or as a material for repairing cracks.

Two-component, solvent-free epoxy primer

Transparent, two-component, solvent-free epoxy primer, with very low content of volatile organic compound. It is in compliance with the LEED requirements for the volatile organic compound (VOC) content. It is used as a primer for epoxy flooring systems, for the preparation of flooring resin-mortars with the addition of quartz sand and as sealing coating on cement-based floors (e.g. industrial areas, warehouses, etc.).

2-component epoxy primer

2-component, colorless, solvent-based epoxy primer. It is used on substrates to be coated with epoxy layers of the DUROFLOOR system.

2-component, water-based epoxy primer

2-component, water-based epoxy primer. It is used as a primer for cement-based substrates, e.g. concrete or cement-screeds, which will be covered with epoxy layers of DUROFLOOR system. It can also be used as a primer of ISOFLEX-PU when applied over non-absorptive substrates or over old waterproofing layers.

3-component, water-based epoxy primer

3-component, water-based epoxy primer. It is used for priming wet or fresh (age < 28 days) concrete floors that will be subsequently covered with epoxy layers of the DUROFLOOR system.

Epoxy primer for oil contaminated concrete floors and vapour barrier

2-component, solvent-free epoxy system. It is used as a primer for oil contaminated, but cleaned concrete surfaces and for the priming of stil damp concrete or screed surfaces which will be covered with epoxy layers of DUROFLOOR system.